Basic Lubrication Principles… What You Need to Know
Search the web…
Our family cars, 4X4s, ATVs, airplanes and where ever we need to reduce friction require some sort of quality lubricants.
Here we’ll discuss some technical lubrication principles, the different types of lubricants available, their proper uses and how to choose the best one for the job.
Before one can properly select a lubricant for a specific application some basic theory must be understood. When one surface moves over another there is always some degree of resistance to movement. This resistance to movement is called friction.
Friction can manifest itself in varying degrees from smooth easy sliding to uneven erratic movement, which can generate excessive heat and cause damage to the moving metal surfaces.
Friction is good when it causes the brakes and tires on cars and trucks to stop the vehicle or when it keeps our shoes from slipping on wet surfaces. Yet, friction is bad when it causes heat, wear and reduced energy in an engine, gearbox, transmission or piece of equipment.
Lubrication is simply the use of a material to improve the smoothness of movement by reducing friction. Lubrication occurs when opposing surfaces are separated by a lubricant film. The immediate result is reduced wear and reduced heat generation.
There are numerous types of lubricants but, for this discussion, we will focus on synthetic and petroleum motor oils, ATF and gear lubes as related to automotive, motorcycles, ATV’s, recreational vehicles and other equipment.
The coefficient of friction between two moving materials is defined as “mu” and changes with load and speed. The force needed to start the movement is defined as static friction and is typically always greater than the dynamic friction, which is the force required to keep the two materials moving at the same speed once initial movement has started.
Different oils and different materials and loading conditions can create vastly different coefficients of friction that can affect performance and longevity of an engine and other mechanical components.
A few basic key functions of a motor oil is to reduce friction under all extremes of operating condition, prevent corrosion of internal engine components and provide for cooling via transfer of heat. When it comes to reducing friction (as well as preventing corrosion and providing effective heat transfer), synthetic lubrication differs from petroleum oil.
When using a petroleum oil, under certain conditions, the lubricant film can be either too thin, thus allowing metal-to-metal contact, or too viscous which causes high internal friction within the layers of the oil.
The key is to select an oil that is thin enough to have a low internal friction coefficient, yet still high enough to effectively separate two metal surfaces under all operational conditions and prevent excessive wear and heat generation. The facts prove that synthetic lubrication achieves both of these objectives, while with petroleum oil there can be a not so favorable compromise.
The uniform molecular structure of synthetic lubricants allows it to flow freely for low internal friction, yet still effectively separate two metal-to-metal contact surfaces under normal and extreme operating conditions and significantly reduce internal wear, due to it’s lubrication properties.
When you look at two metal surfaces, such as piston to cylinder, and visually see that they appear smooth, what you are seeing does not accurately reflect reality.
When viewed under a high-powered microscope, even the smoothest machined surfaces are rough and are viewed as millions of peaks and valleys. These peaks are under extremely high loading and need to wear-in (commonly called break-in) on a new engine. However, there is much discrepancy among automotive and motor sport enthusiasts as to how long of a time period is required for engine wear-in and whether or not petroleum oil lubrication must be used for the initial wear-in.
The time required for wear-in, before converting to synthetic oil, on a new production manufactured engine is very minimal and typically occurs during the hot run test at the engine manufacturer and also on the chassis rolls in the assembly plant, while driving the vehicle around the storage yard, rail head, dealers lot and test drives.
Babying a new production car for many thousands of miles to “break it in” is no longer necessary, as it was many years ago. There are also a few models of high performance production vehicles (such as the Corvette) that come factory filled with synthetic oil, further verifying the fact that petroleum oil is not required to wear-in an engine.
Dave Mann, an Automotive Engineer with lots of testing experience, advocates running a very short cycle (typically about 500 miles or less) of the manufacturers installed petroleum oil, then drain the oil and remove the original filter and you’re ready to install a quality synthetic motor oil and oil filter.
A film of oil is needed between the two surfaces to keep them from welding together, yet still allowing for adequate wear-in. This film of oil can be either petroleum oil or synthetic oil. It is important to understand the fact that synthetic oil will not prevent an engine from wearing in.
With today’s high tech manufacturing technology, designs, equipment and materials, wear-in time can be kept to an absolute minimum. Therefore, synthetic oil can be installed as either a factory fill by the manufacturer or installed by the customer after a short cycle of petroleum oil has been run.
My thanks to Dave Mann for making these articles possible! See the related articles below for more informative Lubrication information…
|Motor Oil Basics |
A Look at Motor Oil Basics… Modern day oils are complex, chemically engineered compounds that have improved upon refined crude oil.
|Important Motor Oil Additives You Should Know About |
Motor Oil Additives Blended at the Refinery… Motor oil additives are what make it possible for motor oil to endure all the possible sources of contamination, wear and deposits during its use.
|Motor Oil Breakdown |
Motor Oil Breakdown causes…Oil breakdown occurs when the major properties of the oil have changed due to oxidation, deposits, thermal degradation, corrosion, shearing and contamination.
|Oil Tests…What You Should Know About Your Motor Oil! |
Motor oil tests that can reveal the quality of your oil. There are many oil tests relating to the chemical, physical and performance aspects of motor oil.
|Oil Filtration Basics |
Oil filtration facts… Useful oil filtration information is presented here to help you make an informed decision regarding your choice of filtration products for your vehicles and equipment.
Still looking for something? Search for it here…